m series Trand ｉｎｓｅｒｔ machine, equipped with independent ｉｎｓｅｒｔ axis, rotary axis, with the characteristics of higher precision and stronger flexibility, which can be more easily to deal with complex parts. it could be personalize customized to meet customer needs, including the bottom bent foot, front and rear operation, Nozzle changing station, 6 axis &8 axis, tilt foot detection, super large components, ultra-high components and other functions.
m series Trand ｉｎｓｅｒｔ machine, equipped with independent ｉｎｓｅｒｔ axis, rotary axis, with the characteristics of higher precision and stronger flexibility, which can be more easily to deal with complex parts. it could be personalize customized to meet customer needs, including the bottom bent foot, front and rear operation, Nozzle changing station, 6 axis &8 axis, tilt foot detection, super large components, ultra-high components and other functions.
| M435 Specification | ||
Size(LxWxH) | 1400 X 1700 X 2000mm | |
Weight | 1650 kg | |
Operation System | Windows | |
No. Of Door | Single Side,Double size(Optional) | |
Safety Grating (Door) | Standard Configuration | |
Air Supply*1 | 0.5-0.65 MPa (ANR) | |
Max Power | 5.4KW | |
Run Power*2 | 3.3KW | |
No. of Insertion Heads | 4 | |
Max Component Size | φ50 (35×35)mm | |
Component Height | ≤35mm | |
Component Feeding Type | Nozzle / Clamp | |
Speed*3 / Component | 0.7 S | |
Placement Accuracy CPK≥1.0 | ± 0.06mm | |
ｉｎｓｅｒｔ Power | ≤98N | |
Insertion Direction | 0-360° | |
ｉｎｓｅｒｔ Component Object | Connector,Switch,Socket Transformer Coils,Ports,Capacitors,Resistors,IC,Etc | |
PCB Size (LxW) | 70×70 ~ 410×500 mm | |
Carrier Size (LxW) | Max 410×500mm | |
PCB thickness | 0.6-2.0 mm | |
Conveyor Space (Upper/Lower) | 35 mm / 20 mm | |
Max. PCB Weight | 5 Kg | |
PCB included side width | ≥5mm | |
PCB Fixed Type | Sero / Cylinder clamping | |
Conveyor Type*4 | Chain | |
PCB Direction | R to L / L to R | |
Conveyor Section | 3 | |
Conveyor Adjusting | Auto | |
Conveyor Height | 900 ± 20mm | |
Lead Clinching Unit*5 | Option | |
Laser Height | Option | |
Auto Nozzle | Option | |
SMEMA | Option | |
MES Connection*6 | Standard Configuration | |
Vision System | Mark CCD (Top) | 1 |
| Component CCD (Bottom) | 4 | |
Max Stations | 201 Radial Tape Feeder | 6 |
218 Radial Tape Feeder | ||
207 Radial Tape 90° Feeder | ||
259 Radial Tape Feeder | 12 | |
254 Radial Tape Feeder | ||
202 Axial Tape Feeder | 6 | |
222 Tube Feeder | 12 | |
203 Tube Feeder | 6 | |
205 Bowl Feeder | 4 | |
Tray Feeder | 1 | |
Remark：If different types feeders mixed using, the num. of feeders are depended on combination. | ||
* 1 Air should be atmospheric frost point: under -17℃, Power Particles: under 5μm, The highest Oil content: under 5mg/m3 . In addition, it need air when machine setup；
* 2 Changed by the using condition；
* 3 Depends on different components；
* 4 The standard machine is chain conveyor, but it can be customized as belt；
* 5 Lead clinching unit will ｒｅｐｌａｃｅ the PCB supporting mechanism；
* 6 Only provided the original data format, the rest should be customized.
